My Blog

Posts for: November, 2018

PrudentUseofX-RaysinChildrenProvidesthemostBenefitattheLowestRisk

It’s important for your child’s current and future health that we watch out for tooth decay. Taking x-rays is a critical part of staying one step ahead of this common disease.

But while x-ray imaging is commonplace, we can’t forget it’s still a form of radiation that could be potentially harmful, especially for a child whose tissues are rapidly developing. We must, therefore, carefully weigh the potential benefits against risk.

This concern has given birth to an important principle in the use of x-rays known as ALARA, an acronym for “As Low As Reasonably Achievable.” In basic terms, we want to use the lowest amount of x-ray energy for the shortest period of time to gain the most effectiveness in diagnosing tooth decay and other conditions.

A good example of this principle is a common type of radiograph known as a bitewing. The exposable x-ray film is attached to a plastic devise that looks like a wing; the patient bites down on it to hold it in place while the x-ray exposure takes place. Depending on the number of teeth in a child’s mouth, an appointment usually involves 2 to 4 films, and children are typically spaced at six months apart. Frequency of x-rays depends on your child’s tooth decay risk: lower risk, less need for frequent intervals.

Each bitewing exposes the child to 2 microsieverts, the standard unit for radiation measurement. This amount of radiation is relatively low: by contrast, we’re all exposed to 10 microsieverts of background radiation (natural radiation occurring in the environment) every day or 3,600 microsieverts annually. Even two appointments of four bitewings each year is a fraction of a percent of the background radiation we’re exposed to in the same year.

This conservative use of x-rays is well within safe parameters for children. As x-ray technology continues to advance (as with the development of digital imaging) we anticipate the exposure rate to diminish even more. Prudently used, x-rays remain one of our best tools for ensuring your child’s teeth are healthy and developing normally.

If you would like more information on the use of x-rays with children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”


By More Smiles of Beverly
November 18, 2018
Category: Dental Procedures
Tags: crowns  
NotallDentalCrownsSharetheSameQualityofLife-Likeness

Dental crowns are an essential means for restoring damaged or unattractive teeth. A well-crafted crown not only functions well, it looks and blends seamlessly with the rest of the natural teeth.

Crowns are artificial caps that cover an entire visible tooth, often used for heavily decayed or damaged teeth or as added protection after a root canal treatment. Most crowns are produced by a dental lab, but some dentists are now creating them in-office with computer-based milling equipment. On the whole, the various crowns now available function adequately as teeth—but they can vary in their appearance quality.

In the early to mid 20th Century the all-metal crown was the standard; but while durable, it could be less than eye-pleasing. Although more life-like dental porcelain existed at the time, it tended to be brittle and could easily shatter under chewing stress.

Dentists then developed a crown that combined the strength of metal with the attractiveness of porcelain: the porcelain fused to metal or PFM crown. The PFM crown had a hollow, metal substructure that was cemented over the tooth. To this metal base was fused an outer shell of porcelain that gave the crown an attractive finish.

The PFM reigned as the most widely used crown until the mid 2000s. By then improved forms of porcelain reinforced with stronger materials like Lucite had made possible an all-ceramic crown. They’re now the most common crown used today, beautifully life-like yet durable without the need for a metal base.

All-ceramics may be the most common type of crown installed today, but past favorites’ metal and PFM are still available and sometimes used. So depending on the type and location of the tooth and your own expectations, there’s a right crown for you.

However, not all crowns even among all-ceramic have the same level of aesthetic quality or cost—the more life-like, the more expensive. If you have dental insurance, your plan’s benefits might be based on a utilitarian but less attractive crown. You may have to pay more out of pocket for the crown you and your dentist believe is best for you.

Whatever you choose, though, your modern dental crown will do an admirable, functional job. And it can certainly improve your natural tooth’s appearance.

If you would like more information on dental restorations, please contact us or schedule an appointment for a consultation.


By More Smiles of Beverly
November 08, 2018
Category: Dental Procedures
JanetJacksonEvenpopstarsgetinsecureabouttheirsmiles

Multi-platinum recording artist Janet Jackson has long been known for her dazzling smile. And yet, Jackson admitted to InStyle Magazine that her trademark smile was once a major source of insecurity. The entertainer said, “To me, I looked like the Joker!” It was only after age 30 that the pop icon came to accept her unique look.

Jackson is not alone. A study commissioned by the American Association of Orthodontists found that more than one third of U.S. adults are dissatisfied with their smile. But there’s good news—modern dentistry can correct many flaws that can keep you from loving your smile, whether you’re unhappy with the color, size, or shape of your teeth. Here are some popular treatments:

Professional teeth whitening: Sometimes a professional teeth whitening will give you the boost you need. In-office whitening can dramatically brighten your smile in just one visit.

Tooth-colored fillings: If you have silver-colored fillings on teeth that show when you smile, consider replacing them with unnoticeable tooth-colored fillings.

Dental bonding: If you have chipped, cracked, or misshapen teeth, cosmetic bonding may be the fix you’re looking for. In this procedure, tooth colored material is applied to the tooth’s surface, sculpted into the desired shape, hardened with a special light, and polished for a smooth finish.

Porcelain veneers: Dental veneers provide a natural-looking, long-lasting solution to many dental problems. These very thin shells fit over your teeth, essentially replacing your tooth enamel to give you the smile you desire.

Replacement teeth: Is a missing tooth affecting your self-confidence? There are several options for replacing missing teeth, from a removable partial denture to a traditional fixed bridge to a state-of-the-art implant-supported replacement tooth. Removable partial dentures are an inexpensive way to replace one or more missing teeth, but they are less stable than non-removable options. Dental bridges, as the name implies, span the gap where a tooth is missing by attaching an artificial tooth to the teeth on either side of the space. In this procedure, the teeth on both sides of the gap must be filed down in order to support the bridgework. Dental implants, considered the gold standard in tooth replacement technology, anchor long-lasting, lifelike replacements that function like natural teeth.

After coming to embrace her smile, Jackson asserted, “Beautiful comes in all shapes, sizes, and colors." If you don’t feel that your smile expresses the beauty you have inside, call our office to schedule a consultation. It’s possible to love your smile. We can help.

For more information, read Dear Doctor magazine article “How Your Dentist Can Help You Look Younger.”




Office Hours
Monday: By Appointment
Tuesday: By Appointment
Wednesday: By Appointment
Thursday: By Appointment
Friday: By Appointment
Saturday: By Appointment
Sunday: Closed

Contact Us